← Back to Sealing & Packaging PTFE TECHNICAL TAPES

PTFE Tapes & Zone Tapes

Technical PTFE tape solutions for sealing, release and high-temperature anti-stick applications, including adhesive, non-adhesive, skived and zone-tape constructions.

PRODUCT FAMILY

Choose the tape construction around the sealing surface.

The SEAL 2026 product portfolio groups the family into adhesive PTFE tapes, non-adhesive and skived PTFE tapes, and PTFE zone tapes with localized adhesive-free / adhesive areas.

Adhesive PTFE tapesFor sealing surfaces and high-temperature anti-stick applications.

Non-adhesive PTFE tapesPTFE tape constructions where a full adhesive backing is not required.

Skived PTFE tapesSkived PTFE material for technical release and sealing applications.

PTFE zone tapesConfigured with localized adhesive-free and adhesive areas.

PTFE ADHESIVE TAPES

Adhesive PTFE tapes for sealing and anti-stick duties

Available in application-specific widths and constructions for heated sealing surfaces and other high-temperature release applications.

SKIVED PTFE TAPES

Smooth PTFE tape constructions for technical release applications.

Skived PTFE tapes provide a smooth PTFE surface and can be supplied in machine-specific widths and formats according to the application.

PTFE ZONE TAPES

Localized adhesive / non-adhesive constructions.

Zone tapes are built with defined functional areas, allowing adhesive and non-adhesive zones to be positioned according to the sealing-jaw geometry and application.

PTFE zone tape roll with localized zones

SEAL PRODUCT PORTFOLIO

The PTFE tape family in the current range

This extract is taken from the SEAL Product Portfolio 2026 and shows the three PTFE tape families used as the technical basis for this page.

SEAL PTFE adhesive, non-adhesive, skived and zone tape product families

APPLICATION LOGIC

PTFE surface where release matters.

The family is intended for sealing and high-temperature anti-stick duties where the tape construction, backing and adhesive pattern must match the real machine surface.

Sealing surfacesRelease layer between heated tooling and the packaging material.

Anti-stick functionPTFE surface used where controlled release is required at elevated temperature.

Localized adhesive zonesZone-tape layouts allow selected areas to remain adhesive-free.

Machine-specific configurationFinal selection is qualified from geometry, operating conditions and the current tape.

TECHNICAL MATERIAL

Complete PTFE technical guide.

Use the public LSC technical guide for a broader overview of PTFE coated fabrics, adhesive series, tear-resistant and anti-static materials, non-adhesive / skived references and Zone Tape constructions. Prices and internal commercial data are excluded.

LSC PTFE Technical Materials Guide 2026 9-page technical reference with material families, codes, widths, thicknesses, weights, PTFE content, tensile / adhesion references and Zone Tape data. View / download technical PDF↓

Distributors & Partnerships For reseller opportunities, service partnerships, territory discussions or application-focused cooperation, contact LSC directly. Request partnership information→

SOURCE-BASED QUALIFICATION

Start from the existing tape or sealing jaw

A photo, drawing or sample of the current installation usually gives enough information to identify whether the application needs an adhesive, non-adhesive, skived or zone-tape construction.